271 CLEANING Easy removal from water for cordless robots A week of peace of mind If the cordless cleaner is not removed from the water immediately after completing its cycle, it will enter sleep mode and rest at the bottom of the pool. To wake it up, the user simply needs to tap on the top of the cover. The cleaner will then climb the nearest wall, allowing the user to easily retrieve it at the waterline. Unleash the potential of the cordless cleaner with the Multi-Day cycle, an additional cleaning mode available through the iAqualink® application. This mode allows splitting the cleaning cycles into smaller occurrences, ensuring the pool is maintained throughout the week. > HOW DOES IT WORK? Choose between 3 or 2 cleaning cycles. Select the type of cleaning mode: complete pool coverage with the floor, walls, and waterline mode, or floor-only cleaning. Enter the spacing needed between each cycle: 24h, 48h, or 72h. At the end of the last cycle, a notification will indicate that it's time to collect the robot. TAP & LIFTTM TECHNOLOGY MULTI-DAY CYCLE > STEP 1: Tap on the top of the cover using a pool pole and hook. > STEP 2: The cleaner wakes up and moves to the nearest wall, climbing up to the waterline. > STEP 3: Grab the cleaner's handle to remove it from the water. Cordless cleaners equipped with Multi-day cycle: RF 5400 iQ and RF 5600 iQ
RkJQdWJsaXNoZXIy NDg2ODU=